# Dent Removal for Damaged Paint and Creases in Upland > Dent removal in Upland when the paint is damaged or the dent is too sharp for PDR. Route 66 Auto Repair explains every option in a written estimate. Source: https://route66autorepairshop.com/auto-body-and-glass-services/dent-removal Updated: 2026-09-17 Business: Route 66 Auto Repair, 1775 W Foothill Blvd, Upland, CA 91786, (909) 608-7699 Hours: Monday to Friday 8 AM–5 PM, Saturday 8 AM–2 PM, Sunday closed **TLDR:** When paint is broken, dent removal becomes a **choice between methods**. We compare **repair, replace or leave it** on a written estimate. Not every dent can be pushed out without paint. Route 66 Auto Repair in Upland handles the harder cases too: dents with chipped paint, creases, and dents where rust could start. We look at what the metal and paint are doing, then explain whether the dent can be pulled and finished here or needs a paint shop. Our ASE-certified technicians write the options on the estimate so you can pick with the facts in front of you. ## What kind of dent do you have? - A dent with chipped or cracked paint at the center - A sharp crease from a pole, post or another car's bumper - A dent on a body line or at a panel edge - An older dent that has started to show rust at the chip - A dent in a bolt-on part where replacement may be simpler ## How do we decide between repair, replacement and leaving it? We start with three questions. Is the paint broken? Is the metal stretched? Is the damaged part bolted on, or welded to the body? A bolted-on part with a deep crease, like a fender, can cost less to replace than to rebuild. A welded panel usually has to be repaired in place, and heavy work there is [quarter panel](https://route66autorepairshop.com/auto-body-and-glass-services/quarter-panel-repair) territory that often goes to a collision shop. Leaving a dent alone is a real option. If the paint is intact and nothing binds, the dent is cosmetic. If the paint is chipped, we treat the bare metal so it does not rust while you decide. That is one of the few items we flag as sooner rather than later. ## Our dent removal process 1. **Inspect metal and paint:** We check paint damage, stretch, and whether the part is bolted or welded. 2. **Lay out the options:** The estimate compares pulling and finishing, replacing the part, or leaving it with bare metal protected. 3. **Do the approved work:** We pull or replace as approved and tell you before any paint step happens elsewhere. 4. **Check the finish:** The repaired area is checked for shape and fit and for moisture sealing at chips. ## What's included in dent removal - Paint and metal assessment - Side-by-side options on the written estimate - Bare metal protection at chips when approved - Fit check of refitted or replaced parts - Photos of the damage before work ## How urgent is a dent with paint damage? **Need now:** - Chipped paint showing bare metal - A crease that keeps a door, hood or trunk from sealing **Need later:** - A crease with intact paint - Old dents with no rust and no binding ## What drives the cost of dent removal? The method sets the price: pulling and finishing, replacing a bolt-on part, or adding a paint step. Paint steps take the most time. Your written estimate shows every step so you know the whole plan before approving it. Clean dings with sound paint may qualify for [paintless dent repair](https://route66autorepairshop.com/auto-body-and-glass-services/paintless-dent-repair) instead, which usually costs less. ## What to do after dent work If fresh finish was applied, wait on waxing and pressure washing until the finish has cured, as noted on your invoice. Check any sealed chip in a few weeks for rust spots. Chips around the repair are covered on our [paint scratch repair](https://route66autorepairshop.com/auto-body-and-glass-services/paint-scratch-repair) page. ## Frequently asked questions ### Why can't my dent be done without paint? When paint is cracked or the metal is creased sharply, pushing the dent can crack more paint or leave a visible ripple. Those dents usually need pulling, filling and paint, or a replacement part. ### Is it cheaper to replace a dented fender? Sometimes. A bolt-on fender with a deep crease can be cheaper to replace than to repair, but a new fender usually needs paint. We compare both on the estimate. ### Will a chipped dent rust? Bare steel exposed to air and moisture will rust over time. Protecting the chip is a small step that buys you time to decide on the full repair. See our [rust repair service](https://route66autorepairshop.com/auto-body-and-glass-services/rust-repair-service) page if rust has already started. --- Call (909) 608-7699 or visit https://route66autorepairshop.com/contact for a written estimate.