# Parking Brake Adjustment in Upland > Parking brake lever pulls too high or the car rolls? Parking brake adjustment in Upland takes up slack and sets shoe clearance. Written estimate. Source: https://route66autorepairshop.com/brake-services/parking-brake-adjustment Updated: 2026-09-17 Business: Route 66 Auto Repair, 1775 W Foothill Blvd, Upland, CA 91786, (909) 608-7699 Hours: Monday to Friday 8 AM–5 PM, Saturday 8 AM–2 PM, Sunday closed **TLDR:** Too many **clicks** means slack somewhere. We adjust at the **wheel first**, then the cable, so the parking brake holds within the travel your maker specifies. Parking brake adjustment sets how far the lever or pedal travels before the brake holds. Route 66 Auto Repair in Upland adjusts parking brakes that pull up too high, press too far, or barely hold on a slope. On most cars the fix starts at the wheel, where shoes or caliper mechanisms self-adjust, and only then at the cable. Our technicians check both and write the result on your repair order. ## How do you know your parking brake needs adjusting? - The hand lever comes up much higher than it used to - A foot-operated parking brake pedal goes nearly to the floor - The car creeps on the steep streets north of Foothill Blvd with the brake set - The lever feels loose with no firm stop - Rear brakes were recently replaced and the brake never felt the same ## Why do we adjust at the wheel before the cable? Cable adjusters are easy to reach, so it is tempting to tighten them and stop. If the shoes or the caliper mechanism are out of adjustment, a tight cable only hides the gap. The lever feels better, but the brake still holds poorly and the cable is under constant tension. We set the wheel end first: shoe clearance on drum or drum-in-hat systems, and self-adjuster function on rear calipers with a built-in parking mechanism. Then the cable is set to the maker's click count. ## Our parking brake adjustment process 1. **Count and test:** We count clicks or pedal travel and test hold on an incline. 2. **Set the wheel end:** Shoe clearance or caliper self-adjust is checked and set on both rear wheels. 3. **Adjust the cable:** The cable adjuster is set so the brake holds within spec without dragging. 4. **Drag and hold check:** We spin the wheels for drag, then test the hold and road-test. ## What's included - Lever or pedal travel check - Rear shoe clearance or caliper mechanism adjustment - Cable adjuster set to spec - Wheel drag check after adjustment - Hold test on an incline - Parking brake warning light check ## Need-now or need-later? **Need now:** - The parking brake does not hold the car on a slope - The brake drags after adjustment attempts at home **Need later:** - A few extra clicks with a firm hold - Adjustment you want done during your next [brake shoe replacement](https://route66autorepairshop.com/brake-services/brake-shoe-replacement) ## How pricing and timing work A straightforward adjustment is short. If a cable is seized or shoes are worn out, adjustment will not fix it, and we quote [parking brake cable repair](https://route66autorepairshop.com/brake-services/parking-brake-cable-repair) or shoes in writing first. AAA members get 10% off parts and labor, up to $75. Adjustments often happen while you wait when the board allows. ## Aftercare Use the parking brake regularly. Setting it keeps the self-adjusters working and the cables moving. Come back if the click count creeps up again quickly. ## Frequently asked questions ### How many clicks should my parking brake have? It varies by vehicle. Your owner's manual or service information lists a range. We set it to that range rather than as tight as possible, since a brake that is too tight can drag. ### Does an electronic parking brake need adjusting? Usually not in the same way. Electronic systems self-adjust, and service requires a scan tool to retract the motors. If yours is not holding, see our [emergency brake repair](https://route66autorepairshop.com/brake-services/emergency-brake-repair) page. ### Why did my parking brake get loose after new rear pads? Rear calipers with built-in parking mechanisms need the piston set correctly when pads are replaced. If not, the parking brake has extra travel. It is usually corrected with a proper adjustment. --- Call (909) 608-7699 or visit https://route66autorepairshop.com/contact for a written estimate.