# Radiator Core Support Repair After a Front-End Bump in Upland > Bent or cracked front support after a bump? Route 66 Auto Repair in Upland assesses radiator core support damage, repairs light damage and explains options. Source: https://route66autorepairshop.com/cooling-heating-ac-services/radiator-core-support-repair Updated: 2026-09-17 Business: Route 66 Auto Repair, 1775 W Foothill Blvd, Upland, CA 91786, (909) 608-7699 Hours: Monday to Friday 8 AM–5 PM, Saturday 8 AM–2 PM, Sunday closed **TLDR:** A small front hit can bend the **core support** and stress the radiator and condenser. We **assess first** and tell you honestly what we can repair in-house. The radiator core support is the panel across the front of the vehicle that holds the radiator, AC condenser, headlights and hood latch. After a parking-lot tap or a bumper hit, it can bend or crack and push the radiator out of place. Route 66 Auto Repair in Upland inspects the damage, handles light body and mounting work in-house, and explains your options honestly if the damage is structural. ## What are the signs of core support damage? - Hood that no longer lines up or will not latch cleanly - Headlight aimed differently from the other side - Radiator or condenser pushed back toward the fan - A new coolant leak or warm AC after a minor collision - Cracked plastic support or broken mounting tabs ## When is it light damage and when is it structural? Many newer vehicles use a plastic or composite core support that bolts on. A cracked tab or a broken bracket on one of those can often be repaired or the support replaced as a bolt-on part. Steel supports that are welded in, or damage that reaches the frame rails, is a different category. For those, we document what we see with photos, explain the options and refer you to a proper structural repair path. We are not a full insurance collision center. For a larger hit, start with [crash damage assessment](https://route66autorepairshop.com/auto-body-and-glass-services/crash-damage-assessment) and we will walk you through what the photos show. ## Our core support repair process 1. **Assess and photograph:** We measure alignment of the hood, lights and radiator, and photograph every bend, crack and broken tab. 2. **Check the cooling and AC parts:** The radiator and condenser are pressure tested, since a shifted support often strains their fittings. 3. **Repair or replace the support:** Light damage is repaired, or a bolt-on support is replaced. If the condenser must come off, the refrigerant is recovered first. 4. **Reassemble and verify:** Parts are refitted, the AC is leak-tested before it is recharged with the refrigerant your vehicle specifies, and cooling is checked on a road test. ## What's included in core support repair - Damage assessment with photos - Radiator and condenser leak and fit check - Repair or replacement of a bolt-on support as quoted - Refrigerant recovery, leak test and recharge when the AC is opened - Coolant refill and air purge - Hood latch and headlight fit check ## Can core support damage wait? **Need now:** - Hood latch that does not hold securely - A radiator or condenser that is leaking or touching the fan - Overheating since the collision **Need later:** - Cosmetic cracks in a plastic support with parts still secure - A slightly uneven hood gap that latches correctly ## How pricing and timing work Cost depends on the support material, how many parts must come off, and whether the AC system has to be opened. The written estimate lists each step, including refrigerant recovery and recharge if needed. If your insurer is involved, we give you the photos and findings so you can share them. Timing depends on part availability, and we text you if the board changes. ## After the repair Watch the temperature gauge and AC output for the first week, and look under the front for drips. Check that the hood latches on the first try. If the AC was opened, it should blow as cold as before. If anything changes, call [(909) 608-7699](tel:+19096087699). The broader [radiator mounting repair](https://route66autorepairshop.com/cooling-heating-ac-services/radiator-mounting-repair) page covers mounts that loosen without a collision. ## Frequently asked questions ### Is a cracked plastic core support safe to drive on? If the hood latches securely and the radiator is held firmly, usually yes for short trips. A loose latch or a radiator that moves is a safety and overheating risk and should be fixed before driving far. ### Why does my AC need service for a body repair? The condenser is mounted to the core support. If it has to be removed, the system must be recovered, then leak-tested and recharged. We never recharge a system without that leak test. ### Will you work with my insurance company? We give you written findings and photos to share with them. We are not an insurance collision center, so for large claims we explain the options and where to go next. --- Call (909) 608-7699 or visit https://route66autorepairshop.com/contact for a written estimate.