# Radiator Condition Inspection in Upland > Radiator condition inspection in Upland: tank cracks, blocked fins, leaks and temperature drop checked, with photos and a repair-or-replace call in writing. Source: https://route66autorepairshop.com/diagnostics-and-inspections/radiator-condition-inspection Updated: 2026-09-17 Business: Route 66 Auto Repair, 1775 W Foothill Blvd, Upland, CA 91786, (909) 608-7699 Hours: Monday to Friday 8 AM–5 PM, Saturday 8 AM–2 PM, Sunday closed **TLDR:** We **pressure-test** for leaks, measure the **temperature drop** across the core, and give you a written repair-or-replace call. A radiator condition inspection at Route 66 Auto Repair in Upland looks at the one part that sheds your engine's heat into the air. Radiators fail by cracking at the plastic tanks, clogging inside, or getting packed with debris outside. We pressure-test for leaks, measure how well it drops coolant temperature, check the fins and cap, and write down whether to repair, clean or replace. ## When to have your radiator checked - The temperature gauge climbs in summer traffic on Foothill Blvd - Crusty white or colored residue on the radiator tank seams - Coolant drips at the front of the engine - Bent or blocked fins behind the grille - The radiator is original on a high-mileage vehicle ## How do we check radiator condition? With the engine cool, we pressurize the cooling system to the cap's rating and watch the gauge. A falling needle means a leak, and we look for where it goes. Plastic tanks crack along the seam where they crimp to the metal core, so that is where we look first. The cap gets its own pressure test, because a weak cap lowers the boiling point. Then we warm the engine and use an infrared thermometer to read the inlet and outlet sides of the radiator and scan across the core. The outlet should be noticeably cooler. Cold stripes across the core mean blocked internal tubes. We also look at the fins: bent, corroded or packed with dust and bugs, they stop air flowing through. Finally we check the mounts and the fan shroud. ## What the radiator report shows - Pressure test result and leak location - Cap pressure test result - Inlet and outlet temperature readings - Cold spots that suggest internal blockage - Fin condition and airflow obstructions - Photos of cracks, leaks or damaged fins ## Our radiator inspection steps 1. **Pressure test:** The system and cap are pressure-tested cold. 2. **Warm scan:** Temperatures are read across the core once the engine is warm. 3. **Airflow check:** Fins, shroud and fan are checked. 4. **Report:** You get readings, photos and a repair, clean or replace recommendation. ## What's included in a radiator condition inspection - Cooling system pressure test - Radiator cap test - Infrared temperature check across the core - Fin, shroud and mount inspection - Coolant level and appearance check - Written report with photos ## Need-now or need-later? **Need now:** - A leaking tank or core - A blocked core with the engine running hot - A cap that fails its pressure test **Need later:** - Dusty fins that can be cleaned - Light seam residue with a passing pressure test ## How pricing and timing work The fee is stated at the counter before we test. Arriving with a cool engine makes the pressure test faster. Many modern radiators are replaced rather than repaired, and the written estimate explains which makes sense for yours. AAA members save 10% on parts and labor, up to $75. Same-day work is possible when the board allows, so call before you drive over. ## Read next Leaks and cracks lead to [radiator repair](https://route66autorepairshop.com/cooling-heating-ac-services/radiator-repair). Dirty fins may only need [radiator core cleaning](https://route66autorepairshop.com/cooling-heating-ac-services/radiator-core-cleaning). The test itself is described on the [radiator pressure testing](https://route66autorepairshop.com/cooling-heating-ac-services/radiator-pressure-testing) page. For fans, thermostats and hoses too, book the [cooling system inspection](https://route66autorepairshop.com/diagnostics-and-inspections/cooling-system-inspection). ## Frequently asked questions ### Will you fix my radiator before it overheats again? Yes. We find out why it overheated first. If the radiator is the cause, the written estimate shows the repair. If it is the fan or thermostat, we tell you that instead. ### Can I use a stop-leak product? It may slow a small leak for a while, but it can also clog the radiator and heater core. Tell us if you have used one, because it changes what we look for. ### Why do plastic tanks crack? Heat cycles make plastic brittle over time, and summer heat speeds that up. Cracks usually start at the seam. --- Call (909) 608-7699 or visit https://route66autorepairshop.com/contact for a written estimate.