# Diesel Fuel System Priming in Upland > Hard starts after sitting or after fuel work? Route 66 Auto Repair in Upland checks the lift pump and primer so your diesel gets fuel before it cranks. Source: https://route66autorepairshop.com/diesel-engine-services/diesel-fuel-system-priming Updated: 2026-09-17 Business: Route 66 Auto Repair, 1775 W Foothill Blvd, Upland, CA 91786, (909) 608-7699 Hours: Monday to Friday 8 AM–5 PM, Saturday 8 AM–2 PM, Sunday closed **TLDR:** A diesel that **loses prime overnight** has a leak-back or a weak **lift pump**. We test both and fix what the numbers show. Diesel fuel system priming fills the filters and supply lines with fuel so the injection pump never runs dry at startup. Route 66 Auto Repair in Upland checks priming problems on diesel pickups and vans that crank long after sitting, or that lose prime overnight. Our ASE-certified technicians test the lift pump or hand primer, measure supply pressure, and give you a written estimate when a part is failing. ## What are the signs of a priming problem? - Long crank on the first start of the day, normal starts after that - No buzz from the lift pump when you turn the key on a truck that should have one - Hand primer that feels soft or never firms up - Stalling right after a fuel filter change - Low fuel pressure code after the truck sat for a week ## What does a lift pump do? The lift pump, also called the transfer or supply pump, moves fuel from the tank to the high-pressure injection pump. On many trucks it runs for a few seconds at key-on to prime the system. When it weakens, the injection pump gets starved and wears faster, since diesel fuel is its lubricant. Loss of prime overnight is different. Fuel is draining back to the tank through a check valve, a filter housing or a cracked line. We tell the two apart with a pressure gauge and a hold test. For the step-by-step air removal, see [diesel fuel system bleeding](https://route66autorepairshop.com/diesel-engine-services/diesel-fuel-system-bleeding). ## Our diesel priming diagnosis process 1. **Key-on check:** We listen for the lift pump and check its power and ground. 2. **Pressure and volume test:** Supply pressure and flow are measured against specification with a gauge. 3. **Hold test:** The system is primed and left to sit so we can see if pressure bleeds off. 4. **Repair and reprime:** The failed pump, valve or seal is replaced, then the system is primed and the engine started. ## What's included in diesel priming service - Lift pump or primer function check - Supply pressure and flow measurement - Pressure hold test for leak-back - Filter housing and check valve inspection - System prime and start verification ## Is it a need-now or need-later repair? **Need now:** - Lift pump dead or supply pressure well below spec - Stalling while driving from fuel starvation **Need later:** - Slightly long first crank with good pressure once running - A hand primer that is stiff but still works ## How pricing and timing work Some lift pumps are on the frame rail and easy to reach. Others live inside the fuel tank, which means dropping it. We confirm the location and include it in the estimate. The diagnostic fee is stated at the counter before testing and applies to approved related repair. If supply pressure checks out but the engine still starves, [diesel fuel pressure testing](https://route66autorepairshop.com/diesel-engine-services/diesel-fuel-pressure-testing) goes deeper. ## Aftercare On a key-on priming truck, get in the habit of turning the key to on for a few seconds before cranking. Change filters on schedule with a [diesel fuel filter replacement](https://route66autorepairshop.com/diesel-engine-services/diesel-fuel-filter-replacement), and let us know if long cranks come back. ## Frequently asked questions ### Can a weak lift pump damage the injection pump? Yes. The injection pump needs a steady supply for cooling and lubrication. Running it starved shortens its life, which is why we test supply pressure on any hard-start diesel. ### Why does my truck only crank long in the morning? Fuel is draining back overnight. A leaky check valve, filter seal or line lets the system empty. A hold test finds which one. ### Do all diesels have an electric lift pump? No. Some use a mechanical pump driven by the engine, and some older engines use a hand primer. We check what yours has first. --- Call (909) 608-7699 or visit https://route66autorepairshop.com/contact for a written estimate.