# Accessory Belt Alignment Check in Upland > Belt alignment check in Upland for chirping, shredded or walking accessory belts. We check pulley line and brackets before a new belt goes on. Source: https://route66autorepairshop.com/engine-services/belt-alignment-check Updated: 2026-09-17 Business: Route 66 Auto Repair, 1775 W Foothill Blvd, Upland, CA 91786, (909) 608-7699 Hours: Monday to Friday 8 AM–5 PM, Saturday 8 AM–2 PM, Sunday closed **TLDR:** A **belt alignment check** finds a pulley out of line before it shreds another belt; we check **brackets, bearings** and pulley plane with a **straightedge**. A belt alignment check measures whether every pulley on the front of the engine sits in the same plane, so the accessory belt runs straight. Route 66 Auto Repair in Upland performs this check when a belt chirps, frays on one edge, or walks off its pulleys. This is about the engine belt drive, not wheel alignment. ASE-certified technicians use a straightedge or laser tool, check brackets and bearings, and write up what is off before any parts are replaced. ## Signs of a pulley out of line - Chirping that a new belt did not fix - Fraying or shiny wear on one edge of the belt - A belt that rolled or jumped off at idle - Rubber dust built up on one side of a pulley - Noise that started after an alternator, compressor or pump was replaced ## What knocks pulleys out of line? The common causes are a replacement accessory with a pulley that sits at a slightly different depth, a bracket bolt that was not seated, a bent bracket from a past accident, and a worn bearing that lets a pulley tilt. Engine mounts that have sagged can also twist the engine enough to matter on some layouts. We check each possibility rather than fitting another belt and hoping. ## Our belt alignment check 1. **Inspect the belt:** Wear pattern and rib condition point to where the problem sits. 2. **Check each pulley:** A straightedge or laser line runs across pulley faces to find one out of plane. 3. **Check bearings and brackets:** Belt off, each pulley is spun and rocked, and brackets are checked for fit. 4. **Correct and report:** Loose or misfit parts are corrected or quoted, then the belt runs under load. ## What's included in a belt alignment check - Belt wear pattern inspection - Pulley plane check with a straightedge or laser tool - Bearing spin and wobble test at each pulley - Bracket and mounting bolt check - Engine mount visual check - Written findings with photos of any misaligned part ## Need-now or need-later? **Need now:** - A belt that has come off or is shredding, since it may drive the water pump and charging - A pulley that wobbles visibly **Need later:** - A faint chirp on cold mornings with an even belt wear pattern - Minor edge glazing to recheck at the next oil change ## How pricing and timing work The check is quick. If we find a part at fault, such as a pulley, bracket or accessory, you get a written estimate before we replace it. A new belt is quoted if the old one is damaged; details are on [serpentine belt replacement](https://route66autorepairshop.com/engine-services/serpentine-belt-replacement). AAA members get 10% off parts and labor, up to $75, with the card at time of service. Most checks happen same-day when the board allows; call before you drive over. ## Aftercare After correction, the belt should run quietly and wear evenly. Look at the belt edge after a month. Pulley bearing problems are covered on [idler pulley replacement](https://route66autorepairshop.com/engine-services/idler-pulley-replacement) and [tensioner pulley repair](https://route66autorepairshop.com/engine-services/tensioner-pulley-repair). ## Frequently asked questions ### Is a belt alignment check the same as a wheel alignment? No. This check is for the pulleys on the front of the engine. Wheel alignment is a suspension service; for that we inspect tire wear and suspension, arrange the alignment and road-test the result. ### Why does my new belt still squeal? A new belt on a misaligned or worn pulley will squeal and wear fast. The belt was often not the root cause. The alignment check finds the pulley or bracket responsible. ### Can belt dressing spray fix the noise? It can quiet a belt for a short time, but it attracts dust and can make belts slip. We do not recommend it as a fix. --- Call (909) 608-7699 or visit https://route66autorepairshop.com/contact for a written estimate.