# Engine Timing Chain Replacement in Upland > Engine timing chain replacement in Upland with new guides, tensioners and sprockets as needed, timing verified before start-up. Written estimate first. Source: https://route66autorepairshop.com/engine-services/engine-timing-chain-replacement Updated: 2026-09-17 Business: Route 66 Auto Repair, 1775 W Foothill Blvd, Upland, CA 91786, (909) 608-7699 Hours: Monday to Friday 8 AM–5 PM, Saturday 8 AM–2 PM, Sunday closed **TLDR:** A **timing chain replacement** renews the chain, guides and tensioners together, with every **timing mark verified** by hand rotation before the first start. Timing chain replacement is the full job: the front cover comes off and the chain, guides, tensioners and often the sprockets are renewed as a set. Route 66 Auto Repair in Upland does this work once testing shows stretch, broken guides or a jumped tooth. ASE-certified technicians lock the cams, verify every timing mark and rotate the engine by hand before it ever starts. Your written estimate lists each part in the kit and the seals and gaskets that come with opening the front of the engine. ## Why replace the whole chain set? - A stretched chain wears the sprocket teeth into its own shape - Plastic guides harden and crack with age and heat - An old tensioner may not hold a new, tighter chain correctly - Cover gaskets and the crank seal are replaced as part of reassembly ## What happens during the job? Once the cover is off, we photograph the guides and chain so you can see the wear. Cams are held with locking tools, and the crank is set at its reference position. After the new set is in, the engine is turned two full revolutions by hand and every mark is checked again. On engines with cam phasers, we look at the phaser and the oil control solenoids as well. The same care applies when the [timing gear alignment](https://route66autorepairshop.com/engine-services/engine-timing-gear-alignment) is checked on gear-driven engines. ## Our timing chain replacement process 1. **Confirm with data:** Cam timing readings and a listening test support the replacement. 2. **Disassemble and photograph:** Front cover off, old parts photographed in place. 3. **Install the set:** Chain, guides, tensioners and sprockets go in with cams locked. 4. **Hand-rotate and recheck:** Two full turns, then marks are rechecked before sealing. 5. **Seal, fill and road-test:** New gaskets and seals, fresh oil and coolant as needed, then a road test and timing data check. ## What's included in a timing chain replacement - Timing chain, guides and tensioners - Sprockets when worn or specified with the kit - Front cover gaskets and crankshaft front seal - Fresh engine oil and filter - Photos of the old chain set - Timing data check and road test after assembly ## Need-now or need-later? **Need now:** - Confirmed stretch with correlation codes on an interference engine - Broken guide pieces found in the oil pan **Need later:** - Water pump or coolant hoses near the front cover that look aged - A valve cover gasket that is seeping but not dripping ## How pricing and timing work This is a labor-heavy job, and the engine layout decides the hours. Transverse V6 engines and engines with chains at the back take far longer than an inline four with the chain up front. Related parts that are easy to reach while the engine is open, such as a water pump driven by the chain, are listed on the written estimate as options. AAA members get 10% off parts and labor, up to $75, with the card at time of service. Plan on the vehicle staying at least a day or more; we text you if the board slips. ## Aftercare Check under the front of the engine for drips during the first week. Keep oil changes on time, since the new tensioners depend on clean oil. Related diagnosis is on the [timing chain repair](https://route66autorepairshop.com/engine-services/timing-chain-repair) page, and cooling parts near the cover are covered by [water pump inspection](https://route66autorepairshop.com/engine-services/water-pump-inspection). ## Frequently asked questions ### How long does a timing chain last? Many are designed to last the life of the engine when oil is changed on schedule. Long oil intervals, low oil level and the wrong grade speed up wear. ### Will a new chain fix my check engine light? If the light was set by cam and crank correlation from a stretched chain, yes, once timing is back within spec. If a cam phaser or solenoid was also faulty, it needs its own repair, and the estimate says so. ### Can I keep my old sprockets? Sometimes. If the teeth show little wear and the kit does not require them, we can reuse them. A stretched chain usually wears sprockets, and pairing new parts with worn ones shortens their life. --- Call (909) 608-7699 or visit https://route66autorepairshop.com/contact for a written estimate.