# Exhaust Bracket and Hanger Repair in Upland > Exhaust held up with wire or a broken bracket? Route 66 Auto Repair in Upland repairs rusted exhaust brackets and mounts so the system hangs right again. Source: https://route66autorepairshop.com/exhaust-services/exhaust-hanger-repair Updated: 2026-09-17 Business: Route 66 Auto Repair, 1775 W Foothill Blvd, Upland, CA 91786, (909) 608-7699 Hours: Monday to Friday 8 AM–5 PM, Saturday 8 AM–2 PM, Sunday closed **TLDR:** When the **steel bracket** breaks, a new rubber piece has nothing to grab. We repair the **mount point** and remove any **temporary wire** safely. If your exhaust is hanging by one mount or someone held it up with wire, the problem is usually a steel bracket, not just the rubber. Route 66 Auto Repair in Upland repairs broken exhaust brackets and hanger rods on the pipe side or the body side, so the system hangs where it was designed to. We photograph the break, explain the fix, and write the estimate before we start. ## What can you check yourself before you come in? Only look with the engine off and the exhaust cold. Pipes stay hot long after you park. - Look behind the car: is the tailpipe tip lower on one side than it used to be? - Look underneath for wire, zip ties or straps someone added - Look for a rubber isolator with nothing attached at one end - Listen for scraping on driveways that did not scrape before - Push gently on the cold tailpipe: a lot of movement means a missing mount ## Is a wire or strap fix safe to drive on? Wire gets you home, and we understand why people use it. It is not a lasting fix. Wire has no give, so every engine movement pulls on the pipe, and it can rub through or cut into the pipe wall. Plastic zip ties soften or melt near hot pipe and let go without warning, often at freeway speed on the 10. If your car is on a wire fix, drive gently and come in soon. We remove the temporary material and check the pipe under it for wear before repairing the mount. ## How are broken exhaust brackets repaired? It depends on which side broke. A rod on the pipe side may be replaced with a new bracket or clamp-on hanger. A rusted bracket on the body side may need a new mounting point. If the pipe around a broken rod is thin, replacing that section is the better fix, covered on [exhaust pipe replacement](https://route66autorepairshop.com/exhaust-services/exhaust-pipe-replacement). Your written estimate shows every step. Worn rubber alone is handled on [exhaust hanger replacement](https://route66autorepairshop.com/exhaust-services/exhaust-hanger-replacement). ## Our hanger repair process 1. **Support and inspect:** We support the system on the lift, remove any temporary wire and find which bracket failed. 2. **Check the metal:** We test the pipe and body metal around the mount so the repair has something solid to hold. 3. **Photo and estimate:** You see the break and approve the repair method in writing. 4. **Repair and align:** We repair the mount, fit the isolator, set the pipe clearance and road-test over bumps. ## What's included in hanger repair - Removal of temporary wire or straps - Bracket and rod inspection on both sides - Metal condition check around the mount - Photos of the broken bracket - New isolator on the repaired mount - Clearance check and road test ## Can a broken bracket wait? **Need now:** - The exhaust is dragging or held by wire - A pipe or muffler hanging by one mount **Need later:** - A bracket with surface rust that is still solid ## How pricing and timing work A clamp-on hanger is quicker than a body-side mount, and rust around the break can change the method, so we quote after inspection. AAA members get 10% off parts and labor, up to $75. Many bracket repairs are same-day when the board allows. Call [(909) 608-7699](tel:+19096087699) before you drive over, especially if the pipe is dragging. ## Frequently asked questions ### My exhaust is dragging. Can I drive it in? If it is dragging, a tow-in is safer. A dragging pipe can catch and tear loose. If you must drive a short way, go slowly and avoid the freeway. Our after-hours key drop is there if we are closed. ### Why did the bracket break instead of the rubber? Steel brackets rust, especially near the muffler where water collects. Once rust thins them, normal engine movement snaps them. We check the other brackets while we are there. ### Is this part of a regular inspection? Yes. Mounts and brackets are on our [exhaust system inspection](https://route66autorepairshop.com/diagnostics-and-inspections/exhaust-system-inspection), so a weak bracket can be caught before it breaks. --- Call (909) 608-7699 or visit https://route66autorepairshop.com/contact for a written estimate.