# Oil Pan Drain Plug Seal Repair in Upland > Drip at the drain plug after an oil change? Route 66 Auto Repair in Upland replaces the plug seal, checks the threads and confirms it stays dry. Source: https://route66autorepairshop.com/oil-change-services/oil-pan-drain-plug-seal-repair Updated: 2026-09-17 Business: Route 66 Auto Repair, 1775 W Foothill Blvd, Upland, CA 91786, (909) 608-7699 Hours: Monday to Friday 8 AM–5 PM, Saturday 8 AM–2 PM, Sunday closed **TLDR:** Most drain plug drips come from a **reused or wrong washer**. We fit the correct seal, check the threads, and **torque to spec**. A drip right under the oil drain plug is usually a worn or missing drain plug seal, the small washer or O-ring that seals the plug to the pan. Route 66 Auto Repair in Upland replaces that seal, checks the plug and pan threads, and torques the plug to spec. It is a small part, and on most cars a quick repair, but a failed one can empty an engine. ## What kind of seal does your drain plug use? Drain plugs seal in a few ways. Crush washers, made of aluminum or copper, deform when tightened and are meant for one use. Rubber-coated or nylon washers seal at lower torque. Some plugs carry an O-ring in a groove. A few newer pans use a plastic plug with a quarter-turn lock and a built-in seal. The most common mistake is reusing a flattened crush washer. It has already deformed once, so it cannot seal again at normal torque, and the instinct is to tighten harder, which strains the pan threads. ## Signs of a failing drain plug seal A drip that turns out not to be at the plug is traced through [engine oil leak repair](https://route66autorepairshop.com/oil-change-services/engine-oil-leak-repair). - A drop hanging from the plug a day after an oil change - A wet ring around the plug while the pan seam stays dry - Two washers stacked on the plug from a past service - A plug that turns with little resistance before it seats - A washer that is split, missing or the wrong size ## Why does a small drip at the plug matter? Heat and vibration can back out a plug that is not seated on a good seal. A plug that falls out on the freeway drains the engine in moments, and the oil light is the only warning. If you see a new drip at the plug, check that the plug is snug by hand, keep trips short and bring it in. Every [oil change](https://route66autorepairshop.com/oil-change-services/oil-change) we do includes a new seal where the plug uses one, and a comeback from our own service goes to the front of the line. ## How we fix a leaking drain plug seal 1. **Confirm the source:** We make sure the oil is coming from the plug and not the pan seam or the filter above it. 2. **Drain and remove:** The plug comes out, and we inspect its threads, head and seal groove. 3. **Check the pan threads:** Pan threads are checked for stretch, cross-threading and burrs. 4. **New seal and torque:** The correct new seal goes on, and the plug is torqued to the value for your pan. 5. **Refill and verify:** We refill or top off, run the engine and watch for any weep. ## What's included - Leak source check at the plug - New seal matched to your plug design - Plug and pan thread inspection - Correct torque for your pan material - Oil top-off or refill as needed - Dry check after the engine runs ## Can a drain plug drip wait? **Need now:** - Active dripping from the plug - A plug that is loose or spins freely - Damaged threads that will not hold torque **Need later:** - A light film that dried and has not come back - A plug head starting to round that still seals ## How pricing and timing work A seal replacement is a small part and short labor, plus any oil lost or drained. If the pan threads are damaged, that becomes a written estimate for a thread repair or a new plug, described on our [oil drain plug replacement](https://route66autorepairshop.com/oil-change-services/oil-drain-plug-replacement) page. AAA members get 10% off parts and labor, up to $75, with the card at the time of service. Seal work fits in quickly when the board allows; call [(909) 608-7699](tel:+19096087699) first. ## Frequently asked questions ### Is a drain plug washer really single use? Most crush washers are. The metal flattens to fill tiny gaps and cannot do it properly a second time. They cost very little, so we replace them at every oil change where your plug uses one. ### The drip started after my oil change here. What now? Call us and bring it in. Comebacks go to the front of the line. We check the plug and seal, fix it, and write the root cause on the repair order. ### Can I drive with a small drain plug leak? For a short trip, usually, if the plug is snug and the oil is full. Do not leave it for weeks. Check the level, skip long freeway runs, and bring it in soon. --- Call (909) 608-7699 or visit https://route66autorepairshop.com/contact for a written estimate.