# Ball Joint Replacement in Upland > Creaks, clunks or wandering steering? Route 66 Auto Repair in Upland measures ball joint play on the lift and replaces worn joints after written approval. Source: https://route66autorepairshop.com/suspension-and-steering-services/ball-joint-replacement Updated: 2026-09-17 Business: Route 66 Auto Repair, 1775 W Foothill Blvd, Upland, CA 91786, (909) 608-7699 Hours: Monday to Friday 8 AM–5 PM, Saturday 8 AM–2 PM, Sunday closed **TLDR:** A worn ball joint is a **safety item**, not a comfort one. We **measure the play**, compare it to the maker's limit, and replace joints only when **the numbers say so**. Ball joints are the pivots that let each front wheel steer and move up and down at the same time. When one wears, Route 66 Auto Repair in Upland can confirm it and replace it. Our technicians unload the joint on the lift, measure the movement against the manufacturer's limit, and photograph what they find. You approve a written estimate before work. A ball joint is a safety part: if it separates, the wheel can fold under the car. That is why it sits near the top of our [suspension and steering](https://route66autorepairshop.com/suspension-and-steering-services) checks. ## What does a worn ball joint feel and sound like? - A creak like an old door when turning into a driveway or over speed humps - A knock from the front corner over bumps at low speed - Steering that wanders or needs small constant corrections - Inner or outer edge wear on one front tire - A torn rubber boot with grease thrown around the knuckle ## How do we test a ball joint correctly? The trick is unloading the joint. Depending on the suspension design, the load sits on either the upper or lower joint, and testing with the weight on can hide wear. The technician supports the car at the right point, then pries and rocks the wheel while watching the joint itself, not just the tire. Some vehicles have a wear indicator on the joint; we read it where fitted. Movement is compared to the manufacturer's allowance. A dry, torn boot gets noted even when play is within limits, because dirt inside will finish the joint soon. ## Our ball joint replacement process 1. **Unload and measure:** The joint is tested with weight off and its movement compared to spec. 2. **Show and approve:** Photos and a written estimate show whether the joint is pressed in, bolted, or part of the control arm. 3. **Replace:** The old joint is removed, the new one installed, and the fasteners and cotter pins are secured to spec. 4. **Align and verify:** We arrange the alignment when the job affects camber or toe, then road-test the car. ## What's included in ball joint replacement - Unloaded play measurement at upper and lower joints - Boot condition check on the matching joint - Knuckle taper and hardware inspection - New fasteners or locking hardware where supplied - Alignment arranged when angles change - Post-repair road test ## Need-now or need-later? **Need now:** - Play beyond the manufacturer's limit - A knock with visible movement at the joint - A wear indicator that has receded into the joint **Need later:** - A tight joint with a torn boot - A tight joint on a high-mileage car, noted for the next visit ## How pricing and timing work Some vehicles take a press-in joint; others only sell the joint as part of a [control arm](https://route66autorepairshop.com/suspension-and-steering-services/control-arm-replacement), which changes the price. Rusted hardware adds time. It is all on the written estimate. AAA members get 10% off parts and labor, up to $75. Many ball joint jobs finish the same day when the board allows, but the alignment may extend the timing. ## Aftercare Grease-able joints need periodic lubrication, which we can handle during an oil service. Watch the tire edges over the next month; if wear continues, call us. A [suspension inspection](https://route66autorepairshop.com/diagnostics-and-inspections/suspension-inspection) each year keeps an eye on the other joints. ## Frequently asked questions ### How dangerous is a bad ball joint? A badly worn joint can separate, letting the wheel drop or turn sideways, which can cost you control. Minor wear is not an emergency, but it should be measured and tracked rather than ignored. ### Should both ball joints be replaced at once? Not automatically. If one side is worn and the other tests tight, one joint may be enough. On high-mileage cars the other side is often close behind, and we tell you what the measurements show. ### Why do I need an alignment after a ball joint? On many cars the joint position affects camber and toe. When that is true for your vehicle, we arrange the alignment and road-test the result. --- Call (909) 608-7699 or visit https://route66autorepairshop.com/contact for a written estimate.