# Tire Tread Inspection in Upland > How much tread is left? Route 66 Auto Repair in Upland measures depth across every tire, reads the date code and says what can wait. Source: https://route66autorepairshop.com/tire-services/tire-tread-inspection Updated: 2026-09-17 Business: Route 66 Auto Repair, 1775 W Foothill Blvd, Upland, CA 91786, (909) 608-7699 Hours: Monday to Friday 8 AM–5 PM, Saturday 8 AM–2 PM, Sunday closed **TLDR:** We measure **tread depth in 32nds** across every groove, check **tire age**, and tell you whether replacement is need-now or can wait. A tread inspection tells you how much grip your tires have left and roughly how long they will last. Route 66 Auto Repair in Upland measures tread depth at several points on each tire, reads the date code and checks the sidewalls. You get the numbers in writing, so you can plan new tires instead of being surprised by them on a wet 210. ## How much tread is enough? Tread depth is measured in 32nds of an inch. New passenger tires usually start around 10 or 11. The legal minimum in most states is 2/32, which is where the wear bars molded into the grooves sit flush with the tread. At that point wet braking is already poor. Rain is rare here, which is exactly why the first storm catches people out: oil on the road lifts and worn tires hydroplane sooner. Many tire makers suggest replacing well before the bars, and we flag anything near 4/32 so you can plan. The penny test is a rough home check, but a gauge reading at several grooves is far more telling. ## What else does a tread inspection cover? - Depth at the inner, center and outer grooves, since uneven wear hides on the inside edge. - The DOT date code: the last four digits are the week and year the tire was made. - Cracks in the sidewall or between tread blocks from sun and heat. - Objects in the tread that have not caused a leak yet. - Matching tread depth across the set on all-wheel-drive vehicles. ## Our tread inspection steps 1. **Gauge each tire:** Depth is read at three or more grooves on each tire, spare included when it is full-size. 2. **Check age and sidewalls:** We read the date code and look for cracking, bulges and cuts. 3. **Write it down:** Readings go on the repair order, with need-now or need-later labels. ## What's included - Multi-point tread readings on every tire - Date code check - Sidewall and tread surface inspection - Pressure set to the door placard - Written results you keep ## Need-now or need-later? **Need now:** - Any groove at or below 2/32 - Steel cords, bulges or deep cracks **Need later:** - Tires around 4/32 to 5/32, to plan within months - Older tires with good tread but light surface cracking ## How pricing and timing work A tread check takes minutes and fits alongside most services. If the readings are uneven, we explain the pattern or suggest a [tire wear analysis](https://route66autorepairshop.com/tire-services/tire-wear-analysis). A broader check of the whole tire, wheel and pressure system is available as a [tire inspection](https://route66autorepairshop.com/diagnostics-and-inspections/tire-inspection). If replacement is due, [tire mounting](https://route66autorepairshop.com/tire-services/tire-mounting) covers new tires. The written estimate comes first, and AAA members save 10% on parts and labor, up to $75. ## Frequently asked questions ### How old is too old for a tire? Vehicle and tire makers give different guidance, often in the range of several years. Heat speeds aging, so we look at the date code and the rubber itself and tell you what we see. ### Is the penny test accurate? It is a rough guide for the 2/32 limit only. It does not show uneven wear on the inside edge. A gauge at several grooves gives you real numbers. ### Should I replace two tires or four? It depends on your drivetrain and how different the tread is. Many all-wheel-drive vehicles need all four close in depth. We check your manual and your readings before advising. --- Call (909) 608-7699 or visit https://route66autorepairshop.com/contact for a written estimate.